background image

13

© 2012 Directed. All rights reserved.

Warning! Safety First

Please read the safety warnings below before proceeding. Improper 
use of the product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only be 
performed by an authorized Directed dealer. If you have any questions, ask 
your retailer or contact Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command 
signal from the remote control transmitter. Therefore, never operate the system 
in an enclosed area or partially enclosed area without ventilation (such as a 
garage). When parking in an enclosed or partially enclosed area or when 
having the vehicle serviced, the remote start system must be disabled using the 
installed menu wheel. It is the user’s sole responsibility to properly handle and 
keep out of reach from children all remote control transmitters to assure that the 
system does not unintentionally remote start the vehicle. THE USER MUST IN-
STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA 
ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIV-
ING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STOR-
AGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the 
sole responsibility of the user.

Manual Transmission Vehicles

Remote starters on manual transmission vehicles operate differently than 
those with automatic transmission 

because you must leave your car in neutral. 

You must read this Owner’s Guide to familiarize yourself with the proper proce-
dures regarding manual transmission remote starters. If you have any questions, 
ask your authorized Directed dealer or contact Directed at 1-800-753-0600.

Summary of Contents for 5204A






















Reviews: