19
Instructions for the installer
TERMOSTATO
DI ESERCIZIO (Te)
TERMOMETRO
MOLLA
DI CONTATTO
TERMOSTATO
DI MINIMA (Tsc)
MOLLA DI
FISSAGGIO
TERMOSTATO
DI MASSIMA (Tmax)
TERMOSTATO
DI SICUREZZA (Ts)
MOLLA DI
FISSAGGIO
fig. 17
Insert the bulbs of the thermostats in their relevant bulb holders
as shown in fig. 17 and secure them in place with the fixing
springs.
In the optional control panel (code 23557) DUPLO IT
version, the bulbs of the sensors/thermostats to be placed
in the bulb holders are the following:
- Flow sensor (Tc).
- Boiler thermometer
- Safety thermostat (small bulb holder).
The flue sensor bulb must not be inserted.
For the return sensor’s electrical connection (Tr) and for
the relevant problems connected with it, see 5.5.7 (page
52) “Return sensor installation”.
fig. 18
Wire the electrical connections as indicated on the general
wiring diagram on page 44 and practical wiring diagrams on
page 21 & 22).
Fit the heat discharge valve (pos. 1) on the safety coil inlet and
insert its sensor in the relevant bulb holder (pos. 2).
It is advisable to redirect the heat safety valve discharge to the
sewage.
The heat discharge valve can be fitted , indifferently, at the
inlet or outlet of the safety coil, provided the valve sensor is
inserted in it relevant bulb holder.
See also chapter 3.7.
SCARICO
1
2
ALIMENTAZIONE
TERMOSTATO DI ESERCIZIO (Te) = WORKING THERMOSTAT
TERMOMETRO = THERMOMETER
TERMOSTATO DI MINIMA (Tsc) = MINIMUM THERMOSTAT
MOLLA DI FISSAGGIO = FIXING CLIP
MOLLA DI CONTATTO = CONTACT SPRING
TERMOSTATO DI MASSIMA (Tmax) = HIGH LIMIT THERMOSTAT
MOLLA DI FISSAGGIO = FIXING CLIP
TERMOSTATO DI SICUREZZA (Ts) = SAFETY THERMOSTAT
Summary of Contents for Gasogen
Page 1: ...Wood Fired Boiler Gasogen 29 93kW Installation and Servicing Manual ...
Page 66: ...Gasogen notes ...
Page 67: ...notes ...