Automatic Products 310 Operating & Service Manual Download

Page: 11 / 100

1.05

MasterMenu Online Software

MasterMenu Online software gives you the capability of
completely setting up any 120 Series Snack
merchandiser, 310 Control Module, 320 food
merchandiser, or 223 Hot beverage merchandiser on your
personal computer (PC).MasterMenu Online also has the
ability to load complete new logic board software revisions
to a machine. To load complete new software into a
machine the PC must be connected directly to the
machine logic board via a cable P/N 56800022 and the
DEX/UCS harness P/N 680509 . Software updates can be
sent to you via e-mail or as a file on a floppy disk.

MasterMenu Online Installation

Personal Computer Requirements

To install MasterMenu Online, you need:

■

Personal or Multimedia computer with a 486 or
higher processor.

■

Microsoft Windows 95 operating system or later.

■

16 MB of Ram.

■

5 MB of hard disk required.

■

VGA or higher resolution video adapter.

■

Microsoft Mouse or Compatible pointing device.

■

3.5 inch floppy drive

CHIP

Two pieces are required to use

CHIP

, the touch memor y

button

(CHIP)

and an Upload/download Harness that

allows

Chip

to communicate with the machine.

Touch Memory Button

(Pn 17500003)

The Touch Memory Button

(CHIP)

can be used to

download to or upload from any 310 Control Module or
APi 20 Series machine.

CHIP

is capable of storing all

settable data from a machine, with the exception of the
time and date. Once

CHIP

is programed you can take it to

as many machines as you wish to upload the information
stored in

CHIP

can be overwritten and reused as

many times as desired.

CHIP

is mounted on a key chain

holder.

CHIP

can be programed from a machine that is

already set up and then used to set up other machines
that are to be programed identically.

CHIP

can also be programed from MasterMenu Online,

MasterMenu Online is a software program that allows you
to set up any 310 Control Module or 20 Series machine
on your personal computer (PC).This information can then
be stored by filename in you PC and is always accessible
for any changes you may want to make the machine in the
future, including pricing. To load CHIP from your PC
requires harness (Pn 17500004), included in this package.

Touch Memory Button

(CHIP)

and Upload/download

Harness

(Pn 16800013)

The

CHIP

upload/download harness is attached to the

Logic Board (LCB) on J1 (upper right hand corner) and
the other end is mounted on the swing panel in a

depression just above the display, six of these harnesses
included in this package.

Chip

Upload and Download Instructions.

Open Machine/Tower door, the display should
indicate “Enter for MasterMenu”.

Press Enter

Press the > until the display indicates “ C o n f i g u ra t i o n ” .

Press Enter

Press the > until the display indicates “ C o n f i g u ra t i o n
L o a d ” .

Press Enter, the display should read
“MasterMenu Online”.

Press the + until the display indicates “Tmu
Upload” ( from Tmu to Lcb) or “Tmu Download”
(From board to Tmu).

Press Enter

The display will indicate “Awaiting Download” or
“Awaiting Upload”.

10.

Press the memory button CHIP against the socket
and the display will indicate “Transfer in Progress”.
When the tra n s fer is complete the display will prompt
“Transfer Complete”. If for any reason the transfer
was unsuccessful the display will prompt “Transfer
Error”.

Note: To Use MasterMenu Online or Chip the Software
on the Logic Board must Be at the Following Revision
or Higher: 3.5 Flash Memory and 3.0 Microprocessor

Echo Package

The Echo package contains the components necessary to
hook a voice synthesizer to any APi 20 series machine.
The voice synthesizer will Echo the display while in
service mode.

Base Kits

Base kits are available to make the vendor compatible
with other manufacturers.

Delivery Bin Cushion

A delivery bin cushion is available for use when vending
heavy items. This cushion is standard in the 320.

Lexan Window

A Lexan window is available as a direct replacement for
the outside tempered glass.

MasterMenu Online Software

MasterMenu Online software provides the means of
remotely configuring the AP 120/320 Series machines.

Conveyer Shelf

The is also a conveyor shelf available for the 320 Series
machine. This shelf is a direct replacement for a standard
shelf. It has a total of 4 columns and can be configured to
hold from 4 to 8 selections per column.

Control module Power Supply

optional equipment