The Setup Menu heading contains all the Setup Menu Items in the machine.
Pressing ENTER when the display indicates Setup will cause the display to be updated with Bill Escrow.
Use the < or > arrow keys to scroll through the following menu items:
Bill Escrow Free Vend Winner Vend Multiple Vend Force Vend Combo Vend Max Payout Set Payout Type
Pressing ENTER when any of the above items are on the display will give you access to that Menu Item.
Below is a detailed list of each of the above Menu Items:
Display
Bill Escrow - N
Use the + or – key to change between
N
,
first
or
last
. Press ENTER to commit to any changes.
N
- Disables bill escrow and all bills will be stacked. Pressing the coin return the customer will receive all
change.
First
- Holds the first bill in escrow and pressing the coin return will return the bill.
(All other money added will need to be coin).
Last
- The machine will accept bills to the highest vend price, pressing the coin return will return the last
bill and all other bills inserted will be returned in change.
Note: Force vend overrides bill escrow.
Free Vend-N
Use the + or – key to change between
N
(no) and
Y
(yes). Press ENTER to commit to any changes.
When Free vend is set to yes the display will prompt "
all items are free
" unless overridden by a custom
point of sale message.
Winner Vend -OFF
To turn on Winner vend, enter a number between 1 and 500 using the selection key pad or the + and –
keys. Off is between
1
and
500
. Press ENTER to commit to changes.
When a customer wins an item, credit will be returned to the customer and the display will indicate
***
winner
*** . Note:When a machine is set to free vend, test vend or the second vend of a combo vend
are not counted for the purposes of determoning a winner.
Multiple Vend-N
Use the + or – key to change between
N
(no) and
Y
(yes). Press ENTER to commit to any changes. If
you choose
Y
the display will prompt:
Timeout - 20
This is the amount of time the customer has to make another selection before their change is returned.
During this time period the customer can make a selection, add more money to make another selection
or press the coin return to receive their change. If the change due back is lest than the lowest priced
item in the machine, change will be returned immediately. This time is period is settable from Five to
Ninety seconds. To change the time use the selection key pad or the + and – keys. Press ENTER to
commit to the time period.
Force Vend - N
Use the + or – key to change between
N
(no) and
Y
(yes). Press ENTER to commit to any changes.
When Force vend is turned on, once there is enough credit established to purchased the lowest priced
item in the machine, the customer must make a purchase.
Note: Force vend overrides bill escrow and does not apply when debit cards are used.
Combo Vend - N
Use the + or – key to change between
N
(no) and
Y
( ye s ) . Press ENTER to enter the combo vend menu item.
Timeout - 20
This is the amount of time the customer has to add more money and/or make the second selection of a
combo vend.
This time is period is settable from Five to Ninety seconds. To change the time use the selection key pad
or the + and – keys. Press ENTER to commit to the time period.
01 XXX-YYY Free N
Use the < or > to move the flashing cursor between the fields.
01
is the combo #. Use the + or – key to scroll through the combo #, a maximum of ten is supported
XXX-YYY
- XXX is the item selected by the customer, YYY is the item to be vended in combination with
the customer-selected item.
Free
is the discounted price of YYY when selected after XXX is selected. Any price can be set for the
second item including free. To set the price use the selection key pad or the + and – keys. Free is located
below 00.05 cents.
N - Use the + or – key to toggle between
N
(not active) and
Y
(active). This allows you to program in
combo vends and turn then on and off as desired.
4.08
setup menu heading
M I S MENU
SETUP MENU
C O N F I G U R ATION MENU DIAGNOSTIC MENU
SECURITYMENU
TIMEFUNCTIONS
PRICE MENU
DISPLAY MENU
Summary of Contents for 310
