Automatic Systems CL 636 Technical Manual Download | Manualshive

Page: 21 / 24

background image

p.

21/24

The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose other than the

use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic Systems. The document is

subject to change without notice.

CL 636-MT-EN

Testing for bad or broken booth components and changes to the parameters different from those set by the factory,

must be made with the «Power Console» software available on request from

Automatic

Systems

.

The «Power Console» program has been created to manage the

Automatic

Systems

booth functions, of the «Single board»

type.

This program works only with a hardware key. Should you need one, please contact

Automatic

Systems

technical assistance

service.

This program communicates with the booth using a serial door on the PC through a RS232/RS485 converter.

In order to work the software needs the following kit:

- RS232/RS485 converter.

- converter cable DB9 female, DB9 male.

- interface cable converter/logic 8 prong plug.

- programming cable with button.

- hardware key.

The minimum required to install is:

- Windows 2000 Professional.

- RAM 128 Mb.

- 100 Mb of free space on the hard disk.

Installing the «Power Console» program.

Click on «hdd32.exe» and choose typical installation. This will install the driver for the hardware key. 2 Install «Power

Console».

For instructions on how to use the «Power Console» software, you can request the handbook by calling

Automatic

Systems

technical assistance service.

For Metal Detector maintenance or to change the parameters set by

Automatic

Systems

you must request

the operating manual or contact

Automatic

Systems

assistance service.

ATTENTION:

If a system error called «ENCODER ERROR» appears on the input status screen, while opening the

program, this could mean that:

- The power supply of the motors is inverted.

- Counting of the encoder rotation stage is inverted.

- Some type of hindrance prevents the doors to move toward the closed position.

3. PROGRAMMING AND ANALYSIS.

«
...
19
20
21
22
23
...
»

Summary of Contents for CL 636

























Reviews:

No comments

Related manuals for CL 636

Brand: DUSCHY Pages: 8

ALTUS II D2/ALT II Series

Brand: SANPLAST Pages: 24

Brand: Samo Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands