Automatic Systems
TR490-NInstall-EN
p
3/16
1. INTRODUCTION
We thank you for choosing the TR490 electrical tripod turnstile designed and manufactured by
Automatic Systems. We are confident that your purchase will fully meet your requirements.
However, in order to obtain maximum satisfaction from this equipment for a maximum period
of time, we strongly advise you to read this manual carefully before installing the equipment.
Although this manual has been prepared with great care, some information may seem
erroneous or unclear to you. In this case, please do not hesitate to contact us with your
remarks or questions.
WARNING:
Y
OUR
TR490
TRIPOD TURNSTILE COMPRISES A
MECHANISM AND VARIOUS ELECTRICAL
COMPONENTS
.
A
NY NEGLIGENCE DURING AN
INTERVENTION IN THE MACHINE MAY SERIOUSLY
ENDANGER YOUR SAFETY
.
A
S SOON AS YOU OPEN
THE HOUSING
,
PUT OFF THE MAIN SWITCH
(
2:1
)
ON
THE ELECTRICAL CONTROL LOGIC
(
2:2
),
LOCATED
UNDER THE HOOD
.
B
E CAREFUL IN HANDLING ANY
INTERNAL ELEMENT WHICH MIGHT BE UNDER POWER
OR COULD BE SET IN MOTION
.
W
HEN WORKING ON THE CIRCUITS
,
IT IS
RECOMMENDED
:
-
NOT TO DISCONNECT WIRES WITHOUT MARKING
THEIR TERMINALS
;
-
NOT TO REMOVE THE CONNECTOR WITHOUT
MARKING ITS PRECISE POSITION
IMPORTANT
B
ECAUSE OF THE SHOCKS THE TURNSTILE COULD
CAUSE
,
WE ADVISE YOU TO PROHIBIT THE ACCESS TO
UNACCOMPANIED YOUNG CHILDREN AS WELL AS TO
ANIMALS
.
