NAM-TRS372-MT-EN-C
p11/38
The information in this document is the property of Automatic Systems and is confidential. The consignee withholds from using it for anything other than the use of the products or the execution of the
project to which they belong and withholds from communicating it to third parties without prior written agreement from Automatic Systems. Document subject to change without prior notice.
2.5.2. Central upright assembly
Unscrew the covers (T) protecting the central uprights (40) and remove them.
Using the bolts (43) and washers (44) provided, fix the arms (45) to the central uprights (40).
Attach the fixed combs (12) to the central uprights (40) by means of the bolts, washers and nuts (6),
(4), (14), (15) supplied.
Note
: In order not to knock against one another, the 2 mobile combs have to be staggered. (cf.
ch.2.5.7. ). Thus, the 2 fixed combs must also be slightly out of line. To that end, one of the 2 fixed
combs must be attached through the upper holes (U), and the second one through the lower holes (V).
Remember to run the electric cables (ch. 2.5.4. ) through the central uprights before you screw the covers
(T) back.
4.
Flat washer DIN 125 M12.
6.
½ round head M12x30.
12. Fixed comb
14. Grower washer DIN 127 M12.
15. Nut DIN 934 M12
40. Central upright
43. Screw DIN 933 M6 x 20
44. Tooth lock washer DIN 6798 M6
45. Central upright arm
43
44
6
4
14
15
T
45
40
12
U
V
U
V
U
V
U
V