Owner Installation Instructions
Axess® Pro Series 3100
5
Soft-Start Soft-Stop
The opener accelerates slowly at the start of the cycle and deaccelerates just
before reaching the limit. This feature reduces the wear and tear on the shutter.
Security Code Store
The opener uses state of the art technology to store your selected transmitter
codes. Up to 511 different transmitters can be stored in the opener’s memory with
the facility to assign an 11 character name to each transmitter.
Remote Limits Positioning
During installation a hand held transmitter can be used with logic console when setting
the travel limits. This allows the installer to closely observe and control the movement of
the shutter from any position rather than having to be within arms reach of the console.
Controlling Lights
The Auxiliary output can be programmed to operate a light relay module. The light relay module can
control the warning or courtesy light. The timing of these outputs can be adjusted to suit your needs.
Extensive Operating Modes Via Control Inputs And Remote Control
The integrated controller can be confi gured to operate in many different ways via its 7 control and safety
inputs. These include P.E, FIRE, GPI, OPEN, STOP, CLOSE, and SWIPE. Remote control operation is provided
with each transmitter button being able to be confi gured to operate one of OSC, PEDESTRIAN, SWIPE,
CLOSE, OPEN, STOP, LIGHT or VACATION functions. The controllers functionality is further enhanced by 4
Auto-Close modes, 3 P.E. response modes and 2 pedestrian response modes. For details refer to relevant
sections of this manual.
Automatic Manual Operation Clutch
The opener is equipped with an automatic clutch. If power to the opener is disrupted for any reason the User
can open or close the shutter manually by using the hand chain. When power is restored simply press the
button on the console or the transmitter to open or close the shutter.
