10
sandpaper to eliminate the unwanted marks before going
on to a finer grit and finishing the job.
WARNING:
Do not use the same sanding sheet for
wood and metal. Metal particles become embedded in the
sandpaper and will scour a wooden surface.
Maintenance
WARNING:
When servicing, use only identical
replacement parts. The use of any other part may create a
hazard or cause product damage.
If the replacement of the supply cord is necessary,this has
to be done by the manufacturer or its agent in order to
avoid a safety hazard.
DO NOT
use solvents when cleaning plastic parts.
Plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use a clean cloth to remove dirt, dust, oil, grease etc.
WARNING:
Do not allow brake fluids, gasoline,
petroleum-based products, penetrating oils, etc. to come
into contact with plastic parts. They contain chemicals that
can damage, weaken or destroy plastic.
WARNING:
DO NOT attempt to modify tools or create
accessories. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious injury. It will also void the warranty.
DO NOT
abuse power tools. Abusive practices can
damage the tool and the workpiece.
Lubrication
All of the bearings in this tool are lubricated with a sufficient
amount of high-grade lubricant for the life of the unit under
normal conditions. Therefore, no further lubrication is required.
