DIMENSIONS
60
70
3
9.5
15.2
17
62.4
COVER BUTTON
TERMINAL
CLAMP
FIGURE WINDOW
RESET BUTTON WITH LOCK
PRESETTING WHEEL
PRESETTING COVER
DUST COVER
62.4
60
22.1
18.7
PANEL CUTOUT
54
+1
0
54
+1 0
• If the digital numbers are hard to read due to sticking dirt, clean them with soft cloth moistened with neutral detergent.
(Do not use organic solvents or caustic soda which will affect the counter surfaces).
• Do not apply oil to the counter. Oil will affect smooth operation of the counter or gather dust that may cause trouble.
• If the counter should fail to operate normally, return it to us along with the details of the trouble.
MAINTENANCE AND REPLACEMENT
1. SETTING THE PRESET VALUE
2. RESETTING
1. Prese the Reset Button until all displayed digits becomes "0".
2. Slowly release the reset button.
3. If the reset button is not completely pushed or not slowly relesed, it may cause incorrect operation.
• Be sure to cut off the counting input (pulse) before resetting.
(Otherwise, counting operation or control output failure may take place).
1. While pressing the Reset Button, open the presetting cover by pressing the cover button.
2. Turn each of the Preset thumbwheels until desired setting is reached.
3. Close the presetting cover firmly after completion of presetting, while pressing the reset button.
4. If the presetting cover is open or is not closed completely, the output will not occur when preset is reached.
OPERATING PROCEDURE
• The unit does not count during opening of the cover).
• Do not reset during operation and opening of the cover.
• Lubrication is not required.
CONNECTION
5
5
3
3
4
4
1
1
6
2
2
7
NO
NO
COM
COM
COUNT
COUNT
RESET
NC
NC
MB
−
4111
MB
−
5111
MB
−
4211
MB
−
5211
37-7, Chuo-Cho, 2-Chome, Meguro-ku
Tokyo 152-0001 JAPAN
Address :
Contacts :
URL :
Tel: +81-3-3716-5151 Fax: +81-3-3710-4552
http://www.lineseiki.com
E-mail:
webtrade@line.co.jp
LINE SEIKI CO.,LTD.
This catalog was last revised Apr. 19, 2010.
*Subject to change without prior notice.
All Rights Reserved,Copyright © 2010,LINE SEIKI CO.,LTD.
