background image

Chapter 1:  Overview and Component Specifications

1–2

DURA

pUlse

 Drives Dynamic Braking User Manual – 2nd Ed., Rev.C – 06/14/2019

Manual Overview

Overview of this Publication

The 

dUra

pUlse

 Dynamic Braking User Manual describes the installation, wiring, 

configuration, and operation of the dynamic braking unit and braking resistors as used with 

GS3 and GS4 series 

dUra

pUlse

 AC Drives.

The content of this user manual may be revised without prior notice.  Please visit the 

Automationdirect.com website to download the most recent version. 

(

www.automationdirect.com

)

Who Should Read This Manual

This manual contains important information for those who will install, maintain, and/or 

operate any 

dUra

pUlse

 GS3 or GS4 series AC Drive that makes use of the dynamic braking in 

their application.

Supplemental Publications

The 

dUra

pUlse

 AC Drive User Manuals (GS3-M & GS4-M) are available from AutomationDirect 

and should be used along with this manual to properly install and operate both the 

dUra

pUlse

 AC drive and the 

dUra

pUlse

 dynamic braking unit.

The National Electrical Manufacturers Association (NEMA) publishes many different 

documents that discuss standards for industrial control equipment.  Global Engineering 

Documents handles the sale of NEMA documents.  For more information, you can contact 

Global Engineering Documents at:

   

 15 Inverness Way East 

Englewood, CO  80112-5776 

1-800-854-7179 (within the U.S.) 

303-397-7956 (international) 

www.global.ihs.com

NEMA documents that might assist with your AC drive systems are:

•  Application Guide for AC Adjustable Speed Drive Systems
•  Safety Standards for Construction and Guide for Selection, Installation, and Operation of 

Adjustable Speed Drive Systems

Technical Support

  By Telephone:  770-844-4200 (Mon.-Fri., 9:00 a.m.-6:00 p.m. E.T.)
  On the Web: 

www.automationdirect.com

Our technical support group is glad to work with you in answering your questions.  If 

you cannot find the solution to your particular application, or, if for any reason you need 

additional technical assistance, please call technical support at 770-844-4200.  We are 

available weekdays from 9:00 a.m. to 6:00 p.m. Eastern Time.
We also encourage you to visit our website where you can find technical and non-technical 

information about our products and our company.  Visit us at 

www.automationdirect.com

.

Summary of Contents for DURA PULSE GS-2DBU



















































Reviews: