External Power
- 24VDC on bottom
connector
USB Micro Interface
- Programming
- Online monitoring
Toggle switch
- Connected to
SWITCH_BUILTIN or
Digital Pin 31
CPU Status Indicators
- PWR LED indicates
power applied
- BASE LED indicates when
base controller is powered
and initialized
- LED controlled by writing to
LED_BUILTIN or Digital Pin 32
microSD Port
- removable flash memory
Arduino MKR shields &
Productivity Open shields
P1000 I/O Modules
P1AM-100 Arduino
®
MKR
Compatible CPU
The P1AM-100 is an Arduino-compatible CPU.
It uses the Atmel SAMD21G18 and can be
programmed in C++ using Arduino IDE. It interfaces
with all P1000 Series I/O modules connected to
the right side and most Arduino MKR form factor
shields connected to the left side.
General Specifications
Operating Temperature
0° to 60°C (32° to 140°F)
Storage Temperature
-20° to 70°C (-4° to 158°F)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Heat Dissipation
4000mW
Enclosure Type
Open Equipment
Module Location
Productivity1000 I/O modules connect on the right
side of module. Power supply, P1AM Shields and MKR
Shields connect on the left side on the module.
Weight
76g (2.8 oz)
Agency Approvals
UL 61010-1 and UL 61010-2-201 File E139594, Canada
& USA
CE*
*See CE Declaration of Conformance for details.
Link to GitHub
Link to full additional resources
