12 VOLT BATTERIES
IN SERIES TO MAKE
A 24 VOLT SYSTEM
26
(6) Where can I locate tubing to make a tower?
Your wind turbine is designed to make mounting as simple and
straightforward as possible. Should you not wish to purchase the custom
tower kit feel free to utilize schedule 48.3 mm steel tubing. This should be
available through your local hardware outlet.
(7) What is the difference between copper and aluminum wire?
Generally, aluminum wire is less conductive, so it must be bigger for the same
amp load and resistive losses as copper. The wind turbine uses copper or
tinned copper for the yaw wires.
(8) What battery should I choose for my wind turbine?
There are multiple battery options in today’s market– flooded lead-acid,
Absorbed Glass Mat (AGM), Gel cell, NiCad and Lithium-ion. There is no
definitive choice for your alternative energy needs. Normally the choice of
battery is determined by availability and pricing. Should you have questions
regarding batteries please consult a local battery supplier, or view: www.
batterycouncil.org. The capacity of your battery bank is determined by your
use. Below is a good guideline.
• 24-volt systems – 200 Amp-hours
Possible Battery Configurations (suggested)
