Relay Terminal Blocks
A-45
ABS Series
ABL Series
ASL Series
Power Relay
SSR
I/O Terminal Blocks
Interface
Terminal Blocks
Common
Terminal Blocks
Sensor Connector
Terminal Blocks
Relay
Terminal Blocks
I/O Cables
Connector Type
Cables
Open Type
Cables
Others
-|Transparent setting guide|-
Specifications
Model
ABL-L04PQ-UN
ABL-L04PQ-UY
※
1
ABL-L04R6-UN
ABL-L04R6-UY
※
1
Power supply
24VDC
ᜡ
±10%
Rated load voltage¤t
※
2
250VAC
ᜠ
50/60Hz 5A, 30VDC
ᜡ
5A
Current consumption
※
3
≤ 20mA
Output type
1a contact relay output
Applied relay
PQ1a-24V [MATSUSHITA (Panasonic)]
G6B-1174P-FD-US [OMRON]
No. of relay points
4-point
Terminal type
Screwless
Terminal pitch
10.2mm
Indicator
Operation indicator: blue LED
Applied
cable
Solid wire
Ø0.6 to Ø1.25mm (60
℃
only)
Stranded wire
※
4
AWG22-16 (0.3 to 1.25mm
2
) (60
℃
only)
Stripped wire length
8 to 10mm
Insulation resistance
≥ 1,000MΩ (at 500VDC megger)
Insulation
resistance
between
coil-contacts
4,000VAC 50/60Hz for 1 minute
3,000VAC 50/60Hz for 1 minute
Between
same contacts
※
5
1,000VAC 50/60Hz for 1 minute
1,000VAC 50/60Hz for 1 minute
Vibration
Mechanical
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Malfunction
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes
Shock
Mechanical
1,000m/s
2
(approx. 100G) in each X, Y, Z direction for 3 times
Malfunction
100m/s
2
(approx. 10G) in each X, Y, Z direction for 3 times
Environ-
ment
Ambient temp.
-15 to 55
℃
, storage: -25 to 65
℃
Ambient humi.
35 to 85%RH, storage: 35 to 85%RH
Material
Terminal block: polyamide 66, conducting plate: brass, case&base: modified polyphenylene oxide
Accessory
Jumper bar: 1
Protection structure
IP20 (IEC standard)
Approval
Weight
※
6
Approx. 148g (approx. 92g)
Approx. 150g (approx. 94g)
Approx. 143g (approx. 87g)
Approx. 144g (approx. 88g)
Rated load current 3A
Rated load current 5A
※
1: This is for load protection and it is recommend to use at the inductive load.
※
2: Relay load capacity for resistive load.
Please connect to a load using the same power supply. Connecting to a load from a different power supply may cause safety issues.
※
3: The current consumption including LED current by one relay.
※
4: When using stranded wire, use End Sleeve (ferrule terminal) crimp terminals.
※
5: In case of ABL-L04 - Y (varistor installed type), this is 300VAC.
※6
: The weight includes packaging. The weight in parenthesis is for unit only.
※
Environment resistance is rated at no freezing or condensation.
Model
ABL-L01PA-NN
ABL-L01PA-NY
※
1
ABL-L01PA-PN
ABL-L01PA-PY
※
1
ABL-L01TN-NN
ABL-L01TN-NY
※
1
ABL-L01TN-PN
ABL-L01TN-PY
※
1
ABL-L04PA-UN
ABL-L04PA-UY
ABL-L04TN-UN
ABL-L04TN-UY
ABL-H16R6-NN
ABL-H16R6-PN
Power supply
24VDC
ᜡ
±10%
Rated load voltage¤t
※
2
250VAC
ᜠ
50/60Hz 3A, 30VDC
ᜡ
3A
Current consumption
※
3
≤8mA
≤20mA
Output type
1a contact relay output
Applied relay
APAN3124
[MATSUSHITA(Panasonic)]
NYP24W-K
[TAKAMISAWA(Fujitsu)]
APAN3124
[MATSUSHITA(Panasonic)]
NYP24W-K
[TAKAMISAWA(Fujitsu)]
G6B-1174P-FD-US
[OMRON]
No. of relay points
1-point
4-point
16-point
Terminal type
Screwless
Terminal pitch
9.0mm (arranging over 2 units)
5.0mm
≥7.8mm
Indicator
Operation indicator: blue LED
Operation indicator: blue LED
Power indicator: red LED,
operation indicator: blue LED
Applied
cable
Solid wire
Ø0.6~Ø1.25mm (60
℃
only)
Stranded wire
※
4
AWG22-16 (0.3~1.25mm
2
) (60
℃
only)
Stripped wire length
8 to 10mm
Insulation resistance
≥ 1,000MΩ (at 500VDC megger)
Dielectric
strength
Between
coil-contact
3,000VAC 50/60Hz for 1 minute
Between
same contacts
1,000VAC 50/60Hz for
1 minute
750VAC 50/60Hz for 1
minute
1,000VAC 50/60Hz for
1 minute
750VAC 50/60Hz for 1
minute
1,000VAC 50/60Hz for
1 minute
Vibration Mechanical
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Malfunction
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes
Shock
Mechanical
1000m/s
2
(approx. 100G) in each X, Y, Z direction for 3 times
Malfunction
100m/s
2
(approx. 10G) in each X, Y, Z direction for 3 times
Environ-
ment
Ambient temp.
-15 to 55
℃
, storage: -25 to 65
℃
Ambient humi.
35 to 85%RH, storage: 35 to 85%RH
Material
Terminal block: polyamide 66, conducting plate: brass,
case&base: poly phenylene sulfide
Terminal block: polyamide 66, conducting plate: brass,
case&base: poly phenylene sulfide
Terminal block, cover:
polycarbonate /
CASE&BASE: modified
polyphenylene oxide
Accessory
-
Jumper bar: 1
Jumper bar: 2
Protection structure
IP20 (IEC standard)
Approval
Weight
※
6
Approx. 138g
(approx. 21g)
Approx. 135g
(approx. 21g)
Approx. 125g
(approx. 72g)
Approx. 128g
(approx. 75g)
Approx. 446g
(approx. 348g)
