Autopage RF-350 rs, Installation & User Manual

8

 
ALARM FEATURE “C” PROGRAMMING:  
 

1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in 

OFF

 position.  

2. Push the Valet switch 

7

  times and hold on the 

7

th

push until  Three

chirps with a long chirp is heard then release the valet switch. You are 
now in the Alarm feature ‘C’ programming mode.  

3. Press and hold the transmitter 

 button for two seconds to enter 

shock sensor program mode.  

Press 
Transmitter 

Button 

One Chirp /  
LED one pulse 

Factory Default Setting

Two Chirps / 
LED two pulse 

1 

Shock Sensor Program Mode 

ADJUST AND TEST THE SENSITIVITY LEVEL OF THE SHOCK 
SENSOR 

1. Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in 

OFF

 position.  

2. Push the Valet switch7 times holding in on the7th  push. Three chirps 

with a long chirp will be heard.  Release the valet switch. You are now 
in the Alarm feature ‘Shock Sensor’ programming mode.  

3. Press and hold 

 button for 2 seconds. One long siren chirp will 

indicate the unit is ready to accept adjustments of the shock sensor. 

4. Press 

 button on the transmitter once. This will 

decrease

 sensitivity 

level by one. Each time the button is pushed and a decrease is made 
the siren/horn chirp will respond with [1] chirp. Two chirps indicate the 
minimum sensitivity. Warn away & full trigger will be 

deleted 

when 

minimum sensitivity is selected. 

Shock sensor OFF

5. Press 

 button on the transmitter once. This will increase sensitivity 

level by one. Each time an increase is made the siren/horn chirp will 
respond with [1] chirp. Two chirps indicate the maximum sensitivity. 

6. Hit the bumper or strong metal part of the vehicle to test the threshold 

level of the sensor.  

a). Activate the warn-away (first stage the shock sensor), the siren will 
emit a short chirp.  
b). Activate the full alarm (second stage the shock sensor), the siren 
will emit a long chirp.  

7. When you are satisfied with the setting, press the 

 button to lock in 

the adjustment. One long siren chirp will indicate the unit has locked in 
the adjustment. 

Note: If 30 seconds of inactivity expires or you turn ON the ignition during 

of above steps, the unit will exit the program mode and return to the 
disarmed mode. Three long chirps will confirm exit.