Autopage RF-350 rs, Installation & User Manual

9

Operation Manual 

TRANSMITTER OPERATION:

Transmitter 

Button 

System Function 

Remark 

Lock Doors & Arm System  

Panic function 

Press and Hold for 3 seconds 

Car Locator 

Under armed mode 

-

Arm and Delete The 2 Stage Shock 
Sensor 

Press twice within 3 seconds 

+ 

Silent Arming / Disarming 

Ignition in "off" position. 

Unlock Doors & Disarm System 

-

Two Steps Door Unlock & Disarm 
System 

Press twice within 3 seconds. 

Trunk Release (Channel 2) 

Press and Hold for 2 seconds 

-

Passive Arming By-pass 

While the system Disarmed. 

Silent Arming / Disarming or 

3

rd

 ch

II 

Switching code For 2nd Car 
Operation. 

For regular remote transmitter Only 

ACTIVE ARMING – LOCK & ARM: 

1.  Press 

button on transmitter. 

2.  The siren will chirp once and parking light will flash once indicating that the system is 

now armed. The vehicle doors will lock upon arming when interfaced with the security 
system. 

Note: 

Defective sensor reminder: 

If the siren sounds 3 chirps, then you have left a 

door, trunk, or hood lid ajar. 

SILENT ARMING / DISARMING: 

Press the 

 button on the transmitter to arm or 

disarm your security system with no chirp sound  heard; arm / disarm confirmation will 
be through the vehicles parking lights only. 

SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: 

Press the 

button on the 

transmitter twice within 3 seconds will arm the security system, by-pass the shock 
sensor or the optional sensor connected to 4 pin plug. The system will  chirp one 
additional time to confirm the sensor bypass mode was activated. The sensor bypass 
feature is programmed to activate for one arming cycle only. The security system will 
return to normal operation during the next arming cycle. 

PASSIVE ARMING:   

Active arming / disarming is controlling your security system via the remote transmitter. 
This security system is equipped with an optional Passive Arming feature, which allows 
the security system to arm 30 seconds after the last door is closed. Operation is  as 
follows.  

1.  Turn the ignition to the “OFF” position and exit the vehicle. After all entrances are 

closed, the security system LED will flash fast for 30 seconds. If you reopen any door