background image

 

6

Press and hold 

 

button on transmitter for two seconds to remote control the trunk release or 

other electric devices. 

 
CHANNEL 3 CONTROL OUTPUT 

 

Press the 

 

 

 buttons on the transmitter to active Channel 3 function 

 
CHANNEL 4 CONTROL OUTPUT 

 

Press the 

 

 

 buttons on the transmitter to active Channel 4 function. 

 
 

CAR LOCATOR

 

Under Armed mode, press the 

 

 button on the transmitter to active car locator function.  

The siren will chirp 6 times. The parking light will flash 12 times, for you to easily locate  
your car.

  

 
DOME LIGHT CONVENIENCE DELAY & SUPERVISION

 

The alarm with a unique feature which will turn on your vehicle dome light as following: 
1. Upon disarming, the interior lights will remain on for 30 seconds. 
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren. 

Note:

 Turn ON the ignition switch or arm the alarm will turn off the dome light.  

(Additional installation required)

 

 
LCD REMOTE CONTROL TRANSMITTER: XT-43 LCD

 

 
 

 

 

 

      

 

        

 

 

Note:   

 If the system is interfered by stronger radio 

frequency around, sources of high voltage electric 
power or such Obstacles like tall buildings and so 
on, the transmission range may get shorter as the 
system uses low out put powered frequency.   

 

Summary of Contents for RF-425LCD














Reviews: