Autopage RS-720LCD, Operation Manual

20

(1 second)

LCD screen lamp turns on for 

5 seconds. 

Press and hold for 1 second  
1 melody sound to confirm enters. 

  (3 seconds)

Timer Programming Mode. 

Press and hold for 3 seconds 
2-melody sounds to confirm  enter. 

  (5 seconds)

Power Save Mode 

Press and hold for 5 seconds 
1 melody sound to confirm enters 

-  

-  

Clear the Flash Icon and 

Melody Sound on the LCD 

Screen Transmitter 

Press within 3 seconds 

-

 (2-second)  

Button Lock 

( )

enable / 

disable 

Press within 3 seconds and Hold 

button for 2 seconds  

-

  (

2-second)

Melody / Vibration 

(

) 

Mode 

Press within 3 seconds and Hold 

button for 2 seconds  

-

 (2-second)

Program Count Down Timer 

(

)

 (10-Minute / 20M / 30 M 

/1Hour /1.5H / 2.0H)  

 Press w ithin 3 seconds cycling   
*leave the buttons starting count   

 down then 

 flashes  

-

    (

2-second)

Enable / Disable Bi Sound 

(Bi) 

While Pressing Button 

Press within 3 seconds and Hold 

button for 2 seconds  

1. Screen Lamp ON: 

Press and hold the

 button one second, one melody will 

sound and  the LCD  screen lamp will turn on for 5 seconds.

2. Power Save Mode: 

While in the power save mode, the 

LCD remote transmitter uses “0” current to save the battery 

power. 

Entry:

 Press & hold the 

 button for 5 seconds, o ne 

melody will sound and the 

 icon on the LCD 

screen  indicates entry of the “power save mode”. 

Exit:

Press any button of the LCD remote transmitter to 

exit the “Power Save Mode”.

3. Clear the Flash Icon and Melody Sound: 

Pressing the

 button 3 times 

within 3 seconds will clear the flash icon and the melody sound on the LCD screen 
transmitter.

4. Stop The Trigger Melody Sound:

While triggering the alarm the LCD screen 

will alert the user through a melody sound and a flashing trigger icon. Press any 
button on the LCD remote transmitter to stop melody sound

only. 

5. Button Lock:

This is useful if you want to disable the 

transmission function of the remote control temporarily to 
prevent from any inadvertent pressing of buttons by others. 
Press the 

 button first, within 3 seconds press and hold 

(

)

button for 2 seconds to 

activate

 or 

cancel 

the button 

lock function, the 

icon will displayed on the LCD screen to 

show the LCD remote transmitter is on “Button Lock”