Autopage RS-720LCD, Operation Manual

8

PASSIVE ARMING WITH PASSIVE DOOR LOCKING 

  The vehicle doors will automatically lock after the passive arming cycle has been 

completed. 

PASSIVE ARMING BY-PASS: 

While the system is  disarmed, Press the 

button 

twice, the system will respond with [1] chirp and LED will turn “ON”. The security 
system will remain in this temporary state for as long as you wish. To exit passive 

by-pass, press the transmitter 

 or 

 buttons and the system will return to 

normal status. 

 
 
 
I. ACTIVE DISARMING – UNLOCK & DISARM: 

1.  Press 

 button on the transmitter. 

2.  The siren will chirp twice and the parking lights will flash twice indicating that 

the security system is now disarmed. The vehicle’s doors will unlock and the 
dome light will turn on for 30 seconds upon disarming. (Note: Power door locks 
and dome light must be installed with the security system.) 

System Disarm 

Doors Trigger 

Trunk/Hood Trigger 

Shock Sensor Trgr 

Ignition Trigger 

Clear The Flash Icon: 

Press the 

 button 3 times within 3 

seconds to clear the flash icon on the LCD 
screen transmitter.

TAMPER DISARMING

: If the alarm is triggered upon disarm, the system’s siren will 

chirp 4 times, and the parking lights will flash 3 times. 

PATHWAY ILLUMINATION

: When receiving an unlock /disarm signal, this feature will 

turn the parking lights “ON” for 30 seconds and for 10 seconds upon the lock signal. 

TWO STEPS DOOR UNLOCK

: This feature will independently unlock the driver’s door 

only when disarming the security system. Pushing the 

 button a second time 

within 3 seconds will unlock the other doors.   

AUTOMATIC RE-ARM

: If this feature is selected, the security system will 

automatically re -arm itself in 60 seconds after disarming with remote  transmitter. 
Automatic rearm will cancel if any door is opened before the 60 seconds timer has 
elapsed.

J. DISARMING WITHOUT A TRANSMITTER

OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE:   

(Factory Default Setting) 
The Override function may be used if the remote transmitter is lost or inoperative. 

1. Enter the vehicle and turn the ignition switch to 'ON’ position.