Autoplugin RCP-B1 Installation Manual Download

Page: 7 / 8

short

operating time of less
than 20 minutes

CAN-bus
error

There is a problem with
connection of the
module to the CAN-bus

Check for the module’s cables
connection

Settings
error

Settings have been
incorrectly stored in
RCP’s memory

Reset the settings (8.1.1),
readjust RCP

Heater no
connection

The heater is unplugged
from CAN-bus or is out
of order

Make diagnostics of the heater

Summary of Contents for RCP-B1

Page 1: ...Autoplugin RCP B1 Installation Manual Rev A ...

Page 2: ...urning off Figure 1 CAN bus 15А 85 86 30 87 Relay1 Climatic module to the contact 85 of Relay1 to the output X2 8 for specialized RC connection White Black Red Yellow Bro wn Blue Grey Green Orange Yellow Grey Orange Blue Brown white Green yellow Red w hite Brown Wh ite blue Outer indicator Additional devices control Feedback for remote control ...

Page 7: ...tion of the module to the CAN bus Check for the module s cables connection 9 Settings error Settings have been incorrectly stored in RCP s memory Reset the settings 8 1 1 readjust RCP 11 Heater no connection The heater is unplugged from CAN bus or is out of order Make diagnostics of the heater ...

Page 8: ... Remote Control Plug in electronic module for the heater remote control CIP Combined Instrument Panel BHM or Boost Heat Mode operational mode of the heater when it operates together with the engine to help the engine and the interior warm up more quickly Autoplugin ES www autoplugin ru ...