background image

P. 6 

User Guide

 AS-1414/ AS-1424

 

Remote Door Locks Option 

Your module can be installed with the remote door locks option.

 

Ignition-controlled Door Locks Option  

This is an added security feature. If your system was installed with the ignition-controlled 

door locks option, the doors will automatically be locked as soon as the user presses the 
brakes while the ignition key is in the 

IGNITION ON (RUN)

 position. 

When the key is turned to the 

IGNITION

 

OFF

 position, the doors will automatically be unlocked. 

(Only available if remote door lock option is installed) 

Secure Lock Option 

Before it can remote-start your vehicle, the module must first disarm the factory security 

system. 

The secure lock feature may be required on certain vehicle models with factory security 
systems that automatically unlock the doors when the security system is disarmed. 

To keep your vehicle protected when the factory security system is disarmed for a remote 

start, secure lock will relock your doors as soon as the vehicle has started. 

Once the engine run cycle ends, secure lock will rearm your factory security system. 

Remote Trunk Release Option 

If your system was installed with the remote trunk release, you can open your trunk by 

pressing the

 TRUNK 

button on the remote transmitter.  Vehicles must have an electric 

TRUNK 

switch or a remote 

TRUNK

 button on the vehicle’s OEM transmitter for this option to be 

compatible with the module. 

Engine Run Time 

(Gas 15 minutes, Diesel 20 minutes by default) If you have a gas engine, your system can 

be programmed to run the engine for 4, 15, or 25 minutes (15 minutes by default). If you 

have a diesel engine, it can be programmed to run the engine for 9, 20, or 30 minutes). 

Starter Kill / Anti-Grind 

This added security feature will immobilize your vehicle when the system is armed 

(LOCKED). If your module was installed with the starter kill option, you will not be able to 

start your vehicle with the key unless the system has been disarmed first (UNLOCKED). 

The starter kill option can be programmed to be active (will not arm automatically) or passive 
(will arm automatically). In passive mode, your installer can program it to arm automatically 

in 1 or 3 minutes.   

Once the vehicle has been remote started, the anti-grind feature prevents the starter motor 

from re-engaging when the ignition key is accidentally turned to the 

CRANK 

position.   

Note: Automobile insurance companies sometimes offer a rebate for vehicles with a 
passive starter kill device.  

Summary of Contents for AS-1414








Reviews: