P. 8
User Guide
To exit Cold Weather Mode, do any one of the following actions:
•
Open the hood.
•
Start the engine by remote.
•
Turn the ignition key to the
IGNITION ON (RUN)
position.
•
Press and release the
AUX
button.
The
LOCK
button on the transmitter will light up.
While the
LOCK
button is still lit up, press the
START/STOP
button.
The transmitter will beep once.
Keep pressing the
START/STOP
button until the transmitter
beeps once
Release the
START/STOP
button.
Its LED will flash quickly.
The parking lights will flash once.
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
•
Press the brake pedal:
•
If the vehicle is in cold weather mode, the parking lights will stay on while the
pedal is pressed.
The Starter Kill and the Anti-grind Feature
With this added security feature, the system will prevent your vehicle from starting with the ignition
key when the Starter Kill is armed. If your Remote Car Starter was installed with the Starter Kill
option, one will not be able to start your vehicle with the key unless the system has been unlocked
and disarmed first, or put into Valet Mode.
Note:
If the Starter Kill is installed, your vehicle will benefit from a protection against starter
motor damage that could occur after remote-starting the engine should the user, by force of
habit, turn the ignition key to the
CRANK
position.
Extended Run Time
With the vehicle running under a remote start, pressing and holding the
START/STOP
button for more
than 3 seconds will reset the run time counter to zero and restart the run time cycle from the
beginning:
•
Press and hold the
START/STOP
button for more than 3 seconds.
The transmitter will beep once.
•
Keep pressing on the
START/STOP
button until the transmitter
beeps 3 times
.
•
Release the
START/STOP
button.
The
START/STOP
button will flash 3 times.
The parking lights will also flash 3 times slowly to confirm the extended run time
(the horn will also honk once if the horn option is configured).
To stop the vehicle, at any moment, simply press the
START/STOP
button.
This procedure can only
be carried out once per remote start.
Example:
If your Module is programmed for a run time of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the
START/STOP
button will reset the counter to zero and the
Engine will run for another cycle (in this case, 3 minutes).
Advanced Features: Installation-programmable Options
The remote car starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
:
The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter. Please note that the
following programmable options may require additional parts and labor.
