P. 22
Installation
Guide
Please note
that most OEM systems will
not
rearm the alarm while the engine is running, but
will
lock the doors.
¾
Smart Secure Lock:
If the vehicle was previously locked with the remote starter transmitter, at remote start the module
will send an
unlock/disarm
pulse before start-up,
lock/arm
when the engine is running, and
lock/arm
once again 4 seconds after it shuts down the engine.
If the vehicle is initially unlocked, upon remote start the module will start the engine and arm the
starter kill, but the doors will not be locked or unlocked at any moment of the sequence.
Starter Kill Arming Mode
The Starter Kill (if installed) can be configured by the installer either to
Passive Mode
(so as to arm
automatically) or
Active Mode
(so as to require the user’s intervention for arming). By default, the
Remote Car Starter is configured to
Passive Mode
.
¾
Passive mode:
•
To
arm
the Starter Kill, press the
LOCK
button on the transmitter,
OR
•
In Passive Mode, the Starter Kill will also automatically arm 1 minute (by default) or 3 minutes
(if configured this way) after the ignition is turned
OFF
or once the last door is closed (if the
doors are monitored).
- The LED on the antenna will flash quickly during the countdown preceding the
activation of the Starter Kill.
- Once the activation countdown expires, the LED will send a series of quick double
flashes to indicate that the Starter Kill is now armed.
•
To
disarm
the Starter Kill, press the
UNLOCK
button on the transmitter.
- The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes
(if configured this way) if no door is left opened (if the doors are monitored) and the
ignition is not turned
ON
.
¾
Active Mode:
•
To
arm
the Starter Kill, press the
LOCK
button on the transmitter.
- The parking lights will flash once.
- The LED on the antenna will flash slowly.
- If remote door locks are installed, this will also lock the doors and arm the OEM-style
alarm.
•
To
disarm
the Starter Kill, press the
UNLOCK
button on the transmitter.
- The parking lights will flash twice.
- The LED on the antenna will remain
OUT
.
- If remote door locks are installed, this will also unlock the doors.
Lock Pulse Duration
•
Option 1:
7/10-sec.
LOCK
and 7/10-sec.
UNLOCK
pulses by default.
•
Option 2:
4-sec.
LOCK/UNLOCK
pulses.
•
Option 3:
A single 7/10-sec.
LOCK
pulse and
two ¼-sec.
UNLOCK
pulses.
Used for double-pulse Disarm/Unlock systems
•
Option 4:
1/10-sec.
LOCK
and 1/10-sec.
UNLOCK
pulses.
Flashing LED
To gain access to this feature, make sure the Flashing LED option has been enabled at the time of
programming. Once this option is enabled, the user has the choice to toggle the Flashing LED
ON
and
OFF
at any given moment.
