Autotek Maxxsonics MX-1 Instruction Manual Download

Page: 2 / 22

OEM INTEGRATION ACCESSORIES

MX SERIES

INDEX PAGE

MX OEM Accessory Overview and Setup

............................................................................................................1

Installation

............................................................................................................................................................2

MX-1 Feature Descriptions

...............................................................................................................................3-4

MX-1 Main Diagram

..............................................................................................................................................5

MX-1 Connecting Low Level RCA Cables to Amplifier.......

.................................................................................6

MX-1 Connecting High Level Speaker Wires (with factory amp)

........................................................................7

MX-1 Connecting High Level Speaker Wire (no factory amp)

............................................................................8

MX-2 Feature Descriptions

..................................................................................................................................9

MX-2 Main Diagram

............................................................................................................................................10

MX-2 Connecting Low Level RCA Cables to Amplifier

......................................................................................11

MX-2 Connecting High Level Speaker Wires (no factory amp)

........................................................................12

MX-3 Feature Descriptions

................................................................................................................................13

MX-3 Main Diagram

............................................................................................................................................14

MX-4 Feature Descriptions

................................................................................................................................15

MX-4 Main Diagram

............................................................................................................................................16

MX-4 Connecting High Level Speaker Wires and Low Level RCA Cables

.......................................................17

Trouble Shooting a System

................................................................................................................................18

Product Warranty

...............................................................................................................................................19

The contents of this manual may not be reproduced or copied without the written consent of MAXXSONICS USA, Inc.

Summary of Contents for Maxxsonics MX-1























Search results

Summary of Contents for Maxxsonics MX-1

Reviews:

Related manuals for Maxxsonics MX-1

Brands by name

Popular brands

Autotek Maxxsonics MX-1, Instruction Manual

Search results

Summary of Contents for Maxxsonics MX-1

Reviews:

Related manuals for Maxxsonics MX-1

Brands by name

Popular brands