background image

P

RODUCT

W

ARRANTY

Page 33

1. AutoXray warrants to its customers that, on the date the Products are delivered, they shall be

free from defects in manufacture.

2. This warranty shall apply only to defects that appear within 365 days, and which are reported

to AutoXray within 455 days, following the date the Products are delivered.

3. New replacement Products are warranted as new.

4. Reconditioned replacement Products and repaired Products are warranted as new for the

longer of the remainder of the original warranty period or 90 days from the date of delivery of

the repaired or replaced Product.

5. This warranty does not cover defects caused by abuse, mishandling, accident, improper installation

or application, the malfunction of another component or part of any device in which the Products

installed or with which the Product interfaces, or extend to Products which have been modified or

repaired by anyone except AutoXray or its authorized service representative, or to a Product with

respect to which the serial numbers or identification marks have been altered or removed.

6. AutoXray makes no other warranties other than those expressly stated herein.

7. AutoXray's customers' exclusive remedy under this warranty is repair or replacement at

AutoXray's option and such repair or replacement shall satisfy AutoXray's warranty obligation

to its customers whether in contract, tort, negligence, strict liability or otherwise.

8. Prior to returning a Product for warranty adjustment, AutoXray shall require a return 

authorization and will issue a return authorization number. The return authorization number

shall be placed conspicuously on the outer package shipping label. Products returned to

AutoXray shall be accompanied by a written description of the reasons for return, the 

circumstances under which the defect became apparent and the date the defect occurred or, 

if not known, the date the defect was discovered.

9. If a returned Product is found not to be defective, AutoXray shall return the product and

invoice for the costs of testing and return shipment.

10. If a returned Product is found to contain a defect which is not covered by this warranty

AutoXray shall provide a written quotation showing the estimated cost of repair or the price of

a replacement. In the event instructions as to the disposition of the product are not received

within 30 days from receipt of such estimate or quotation, AutoXray shall return the product

and invoice for the cost of testing and return shipment.

11. If a returned Product is found to be defective and such defect is covered by this warranty,

AutoXray shall at its option and at no charge to the customer, repair or replace the Product.

Following such repair or replacement, AutoXray shall return the Product at AutoXray's expense.

You 

Must Register

to receive these great added benefits

Register By Mail

Register online at 

www.autoxray.com

and receive even more benefits

Free 2 year extended warranty coverage

Free 3 year extended warranty coverage

Free unlimited technical support

Free unlimited technical support

Free minor software updates over the Internet Free minor software updates over the Internet

Receive information about new products

Receive information about new products

Receive information on major product

Receive information on major product

enhancements

enhancements

You must register within 60 days of your date of purchase to qualify for these added benefits.

Otherwise there may be a fee associated with your technical support.

Return for Repair

If it becomes necessary to send the EZ-Read back to us for repair, contact AutoXray at

480.804.1673, ask for an RMA number, then send it to:

AutoXray

1800 W. Broadway Rd., Bldg. 5

Tempe, AZ 85282

 

Summary of Contents for EZ-READ

































































Reviews: