Mounting
Installation Handbook, AutroSafe Interactive Fire Alarm System, Release 3, 116-P-ASAFE-FA/DE,
Rev. J, 2011-12-06,
Autronica Fire and Security AS
1.11.5 Mounting the Batteries
Unscrew the screw as shown on the illustration below.
Lift the lower part of the cover off the bottom slot and remove the
battery cover.
Place the batteries in their position as shown, then reassemble the
battery cover.
1.11.6 Reassembling the Front Panel
When all the necessary cable connections are done, reassemble
the front panel.
Open the front panel.
Tighten the 4 wing nuts on the right and left side inside the cabinet.
Interconnect the ribbon cable(s) between the front panel and the
cabinet.
Close the front panel, and tighten the two lock screws on the top
and the bottom on the right hand side.
Battery Cover
Screw
Batteries;
2x12V / 12Ah
Summary of Contents for Autro Safe BC-320
Page 60: ......