background image

34

A

d

d

it

io

n

a

In

fo

35

A

d

d

iti

o

n

a

l I

n

fo

Why does 
my digital 
station 
have two 
numbers?

 

„

RF numbers

 are actual locations of the stations on the new 

digital spectrum.

 

„

Digital numbers

 (the numbers you’re used to) simply allow 

stations to maintain pre-DTV, long-established identities 

while still taking advantage of the new features provided by 

the digital signal.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 

„

Reorient or relocate the receiving antenna.

 

„

Increase the separation between the equipment and receiver.

 

„

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

„

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Ignition L.P. may cause interference and void the user’s authority to operate 

the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Limited Warranty

This brand product is warranted by NHENS DIGITAL, INC. to the original purchaser against manufacturing defects in materials and 

workmanship encountered in the normal noncommercial use of this product for a limited warranty period of: 

Twelve (12) Months 

Labor and Parts

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.

1-LABOR: During the twelve months labor limited warranty period: NHENS DIGITAL, INC. will, at its option, repair the defective product 

at no cost to you, or replace the defective product with a new or remanufactured functionally equivalent product of equal value.
2-PARTS: During the twelve months parts limited warranty period, NHENS DIGITAL, INC. will supply new or rebuilt replacements for 

defective parts as may be deemed. 
3-This Warranty DOES NOT APPLY to products that have been damaged due to abuse, misuse, accident, alteration, modification, 

negligence, line power surges, connection to improper voltage supply or settings, accident, acts of God and tampering or products 

that have been serviced by any unauthorized service center or third party. This Warranty DOES NOT APPLY to LCD and other acces-

sories packaged with the unit. 
4-In order to have your merchandise repaired or replaced by warranty, you must contact our Customer Service representatives by 

phone or email, and get RMA number. Once you have obtained a RMA number, send the unit pre-paid to our authorized service 

center in the original packaging or reasonable substitute to prevent damage. You “Must” include your full name, shipping address 

and telephone number for our reference with Proof of purchase. No return will be shipped back to a PO BOX. NHENS DIGITAL, INC. 

will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any or all of the necessary 

information. It will take approximately 3 to 4 weeks to process, from the date of receipt.
All of the accessories that came with the product package must be sent along with the main unit. The RMA number issued by our 

customer service rep. must be written on the mail package, along with return address.
Contact the number & email below for service:

1-866-706-4367 / dstsupport@dstreamtech.com 

EXCEPT TO THE EXTEND PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES IN CONNECTION WITH THE PRODUCT, 

INCLUDING WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN, AND 

NO WARRANTIES EXPRESS OR IMPLIED INCLUDING SAID WARRANTY OF MERCHANTABILITY, SHALL APPLY TO THIS PRODUCT 

AFTER SAID PERIOD. SHOULD THIS PRODUCT PROVE TO BE DEFECTIVE IN WORKMANSHIP OR MATERIAL, THE CONSUMER’S 

SOLE REMEDY SHALL BE SUCH REPAIR OR REPLACEMENT AS IN HEREIN ABOVE EXPRESSLY PROVIDED, AND UNDER NO 

CIRCUMSTANCES SHALL BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL ARISING OUT OF THE USE, 

MISUSE, OR IN ABILITY TO USE THIS PRODUCT. THIS WARRANTY IS NONTRANSFERABLE.
Some states do not allow the exclusion and limitation of incidental or consequential damage, or allow limitations on how long an 

implied warrant lasts, so the above limitations or exclusions or inclusions may not apply to you. This warranty gives you specific legal 

right and you may also have other rights, which vary from state to state.

License Notice 

Manufactured under license from Dolby Laboratories.

Trademark Acknowledgment 

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

For product support, call 

1-866-315-0426

Summary of Contents for Auvio 16-923




















Reviews: