background image

4

S

a

fe

ty

5

S

a

fe

ty

12

) Refer all servicing to qualified service personnel. Servicing is required when 

the product has been damaged in any way, such as power supply cord or plug 

is damaged, liquid has been spilled or objects have fallen into the product, the 

apparatus has been exposed to rain or moisture, does not operate normally, or 

has been dropped.

13

) Lightning – For added protection for this product during a lightning storm, 

or when it is left unattended and unused for long periods of time, unplug it 

from the wall outlet, separate battery from the apparatus and disconnect 

the antenna or cable system. This will prevent damage to the product due to 

lightning and power-line surges.

Important Safety Instructions

Always be careful when using your product. To reduce the risk of fire, electrical 

shock and other injuries, keep these safety precautions in mind when installing, 

using and maintaining your TV.

1)

  Read these instructions

2)

  Keep these instructions.

3)

  Heed all warnings.

4)

  Follow all instructions.

5)

  Do not use this product near water.

6)

  To clean, unplug and separate from all power sources and use a dry cloth only.

7)

  Do not block any ventilation openings.

8)

  Do not install or use near any heat sources such as radiators, heat registers, 

stoves, or other products (including amplifiers) that produce heat.

9)

  Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the product. 

10

) Only use the attachments / accessories specified by the manufacturer.

11

) Unplug this product during lightning storms or when unused for long periods of time.

Summary of Contents for Auvio 16-923




















Reviews: