- 3 -
LIMITATION OF LIABILITY
This publication is provided “as is” without warranty of any kind, either
express or implied, including but not limited to, the implied warranties of
merchantability, fitness for any particular purpose, or non-infringement of the
third party’s right.
This publication could include technical inaccuracies or typographical errors.
Changes are added to the information herein, at any time, for the improvements of
this publication and/or the corresponding product(s).
DISCLAIMER OF WARRANTY
In no event shall the supplier be liable to any party or any person, except for
replacement or reasonable maintenance of the product, for the cases, including
but not limited to the followings:
Any damage or loss, including but without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
Personal injury or any damage caused by inappropriate use or negligent
operation of the user;
Unauthorized disassemble, repair or modification of the product by the user;
Any problem, consequential inconvenience, or loss or damage, arising out of
the system combined with the devices of the third party;
Any claim or action for damages, brought by any person or organization being
a photogenic subject, due to violation of privacy with the result of that
surveillance-camera’s picture, including saved data, for some reason,
becomes public or is used for the purpose other than surveillance.
INSTALLATION OF TWO BUILT-IN HDDs:
There is a hard disk holder inside the device for 2 IDE HDDs.
Use a screwdriver to fix the screws. Install the hard disk tray with care to avoid
damaging the hard disks, the cables, and/or the case. (Note)
Make sure to set both HDDs as
master
or
cable select
. The settings should be
described on the HDDs or in the manuals come with the HDDs.
Note 1: Please power off the system before removing the HDDs.
Note 2: Please refer the work to qualified service personnel or system installers.
