- 40 -
The default setting is “ˇ” - checked.
Screen Message –
to display the event message on the screen or not. Press
ENTER to check/uncheck this item. The default setting is “ˇ” - checked.
E-mail –
to send the event e-mail to remote station or not. The e-mail will be
sent to the predefined receivers at the moment when the event is triggered.
Press ENTER to check/uncheck this item. The default setting is “–” -
unchecked.
FTP –
to send the recorded event video/audio files to FTP server or not. Press
ENTER to check/uncheck this item. The default setting is “–” - unchecked.
6.2.2 Motion Setup
In Camera Setup, press ENTER to call up Motion Setup as shown when the
highlighted option is Motion Settings.. of the camera to setup. The Motion setup
allows the administrator to define how the system responds to the detected motion
for the camera.
The general operations are as below:
Turn the Jog/Shuttle or press
▲
▼◄►
to select the items.
ESC
Press this button to escape from this screen, and return to Camera Setup display.
If the Save dialog is shown, press ENTER to exit and save, ESC to exit without
saving.
Following is a brief description for each item and its specific operations:
