- 47 -
6.5 Scheduled Record Setup
In Setup Menu display, turn the Jog Dial or press
▲
▼
to change the highlighted
option to Scheduled Record, and then press ENTER to call up Scheduled Record
Setup as shown.
The Scheduled Record Setup allows the administrator to define when and how to
record for the system. There are up to 16 time segments (T1 – T16) for each
weekday.
The general operations are as below:
Turn the Jog/Shuttle or press
▲
▼◄►
to select the items. The display will
scroll left/right if the selected item is not shown on the screen.
ESC
Press this button to escape from this screen, and return to Setup Menu display.
If the Save dialog is shown, press ENTER to exit and save, ESC to exit without
saving.
Following is a brief description for each item and its specific operations:
Start –
the start time of this time segment, increment at 30 minutes. (The end
time of this time segment is implicitly set as the start time of next time segment,
or the start time of the first time segment of the same weekday if it’s the last one.)
Press +/- buttons to select the desired start time.
Example: If the user sets the start time of T1/MON at 9:00, T2/MON at 18:00,
T3-T16/MON at N/A (Not Available), then T1/MON is 9:00-18:00,
