- 8 -
2. Panels and Remote Controller
2.1 Front Panel
A: Alpha-numeric Buttons (1-9, 0, *, #)
These buttons are used to enter text and number in the way similar to most of the
mobile phones.
These buttons can also be camera selection in most of the circumstances. During full
screen display, press the number to switch to selected camera. During split window
display, press the number to change the focus camera to desire channel.
B: PTZ Camera control panel
1. PTZ Button
In main screen display, press this button to enter/exit PTZ control if the focus camera
is a PTZ camera.
2. NEXT Button
Press this button for the next miscellaneous control.
3. GOTO Button
Press this button to move the camera to the preset position.
4. SET Button
Press this button to set the preset position of the PTZ camera.
5. Left/Right Buttons (
◄
,
►
)
Press these buttons to pan the camera.
6. Up/Down Button (
▲
/
▼
)
Press this button to tilt up/down the camera.
7. ENTER Button
This button is used to start/stop the selected PTZ control mode
8. Zoom +/-
Press +/- to control the lens zoom in/out
9. Focus +/-
Press +/- to control the focus near/far.
10. Reset Button
Use a thin stick to touch this button to reset the whole system should it hang up
abnormally.
A
D
E
G
H
C
B
F
A
D
E
G
H
C
B
F
