AVDT-BOB
User’s manual
v1.6
Page 7 / 25
2.5
Access to AVDT-
BOB’s User Interface via a Browser
The user interface of an AVDT-BOB can be launched without installation by any standard
Web browser compatible with HTML5 and JavaScript standards.
The device hosting the web browser must comply with the following:
-
May be any platform PC, Laptop, Tablet, Smartphone working whatever OS
(MacOS, iOS, Android, Windows,
Linux …)
with a minimum resolution of 800x600
or 600x800
-
Must be connected to the same IP network than the AVDT-BOB to control it
-
It can use WIFI or Ethernet link
To launch the user interface of an AVDT-BOB using a browser
Start a Web Browser (i.e. Safari, Firefox, Chrome, Opera
…)
Write the
User Interface Name
(see §2.2)
terminated by “
.
local
”
in Web Browser
address field/bar to ask it accessing to the IP server with a local name in your local
area network
(“.local” at the end is needed to
force mDNS local name in the
browser)
“
AVDT-BOB-145-UI.local
” for instance to conne
ct to AVDT-BOB serial
number 145 if the Dante name was not changed
The Browser will display AuviTran
’s
Logo
during the loading of the user’s interface.
After loading you will see the interface of the AVDT-BOB User interface as Follows
(iPad/Safari and iPad/Firefox).
See chapter 3 for a description of the AVDT-
BOB User’s interface
.
Notices:
-
IE and Edge on Windows OS does not manage the
“.local” and mDNS name.
Use
the IP address of the User’s Interface for this web Browser or
follow instructions
given in §2.4 notices to run web browser directly from AVSMonitor.
-
If you have problem with the UI name, remember you can change it using Dante
controller.
