Email: support@iauvon.com
Email: support@iauvon.com
13
2. Connect a pair of electrode pads to one lead
wire and plug the other end to the device.
3. Attach at least one pair of electrode pads to
the massage area and press the edge of the
pads firmly on your skin to make sure full contact.
(Make sure the unit is off when you attach the
pads.)
Note: Make sure both pads on the skin are not
overlapping. The electrode pads should be at
least one inch apart from each other.
Each lead
wire needs to be connected to a pair of pads
(2 pads), or it won’t work.