3
Operating Information
Operating Instructions
1)
Clean visible dirt, mositsure or liquid residue from items to be disinfected as per manufacturer’s
instructions.
2)
Place item(s) in the AUVS Germicidal Enclosure (UV Box). For items with cords (or leads) that
must remain connected, thread the cord through the unit’s Wire Routing System.
3)
When disinfecting multiple items, do not stack or allow sides of items to touch.
4)
Close the door and turn the knob to lock. Press the red button to begin the decontamination cycle.
5)
When the red button and LED indicators turn off, remove item(s) and use normally.
Place any item inside the UV Box
without stacking or overlapping.
Wire Routing System accommodates
items that must remain connected.
Close the door and turn the knob
to lock for Disinfection Cycle.
Press the red button to begin the
Disinfection Cycle.
Note:
Covered surfaces not contacted by the UV light will not be disinfected.
