background image

AUX Link car adapter for iPod, iPhone, iPad     

USER MANUAL 

 

 

AUX Car Kits 

 

http://auxcarkits.com/ 

 

Copying or reprinting of this material without reference to the original source and reciprocal links are strictly prohibited 

 

5.  Plug  the  wire  harness  connector  into  the  CD  changer  port  at  the  back  of  the 

radio. Make sure it has a firm connection. 

6.  Connect your iPhone, Pod or iPad to the adapter through the iPod cable. Switch 

on  the  electric  power  and  turn  on  the  car  radio.  Press  the  CD  (or 
Disc/Mode/CDC/SOURCE/AUX)  button  on  radio  repeatedly  until  "CD  x-x" 
appears  on  the  radio  display  (x  stands  for  the  track  number  of  "Now  Playing" 
song on iPod), which proves that iPod mode has been completely synchronized 
and  activated.  The  time  necessary  for  synchronization  varies  depending  on  the 
number of playlists that you have on your device. 

7.  Test the performance of the device by playing some of your music files. 
8.  If the test is successful, insert the car radio back into  the dash and put the wire 

harness and the adapter unit in a proper place.  

9.  Put the iPod and AUX cables in a convenient place (they can be displayed in the 

ashtray, glove box, etc.). 

10. The  installation  is  completed.  Connect  your  mobile  device  and  enjoy  your 

favourite songs with high quality sound. 

Important: 

  If the harness has a BLACK ground wire,  please attach it to any metal part of the 

head  unit  body;  If  the  harness  has  a  YELLOW  power  wire,  please  attach  it  to  the 
power  of  the  car,  which  connects  to  the  battery;  If  the  harness  has  a  RED  ACC 
wire, please attach it to the ACC signal of the car. It’s extremely important to attach 
these cables to the right place otherwise the AUX Link car adapter will not work! 

  If  the  car  already  has  a  CD-changer  plugged  into  the  jack,  the  AUX  Link  adapter 

can  be  connected  in  parallel  through  the  splitter  (Parallel  Harness  or  MP3/CDC 
Switch Cable will be provided). 

  Before  using  the  device  connected  via  AUX  cable,  you  should  disconnect  your 

iPhone,  iPod  or  iPad  from  the  adapter  or  turn  them  off,  using  the  keypad.   When 
you  are  in  AUX  playback  status,  the  volume  can  be  adjusted  only  through  the  car 
stereo.  

 

5.

 

USAGE: 

Control Mode: 

Summary of Contents for Link













Reviews: