Turning On/Off the Device
To turn on/off the device, long press the button for 3 seconds. Cenote will make a short vibration
and illuminate in red and yellow to indicate command success.
If no activity is detected for 10 minutes or longer, Cenote will turn off automatically.
If the battery temperature is over 149±34°F(65±1°C), the light on the button will blink in red 8
times and the device will implement overheat protection and suspend usage temporarily.
●
●
●
Tip:
To prevent overheating, it is recommended to wait for 5 minutes after 3 consecutive sessions before
using again.
Setting Up The Device
There are 4 settings; short-press the button to choose between temperature options 1-3. Setting 4
is the Pro Mode, a tailor-made experience for the connoisseurs, controlled via the AUXO Connect app.
It is recommended to cycle through the settings first before starting the session to get familiarized
with the setting indications. For setting details, see next section.
To start the session, select the desired setting and leave idle for 5s, it will proceed to the preheating
phase before starting the session.
When the session is over, Cenote will begin to cool down. The steady red light indication will gradually
dim out as the temperature drops.
Once the heating rod cools down to 140±34°F(60±1°C), Cenote will go into standby.
To terminate mid-session, short-press the button to exit. The device will go into standby.
1.
2.
3.
4.
5.
