Don’t handle if hot.
Isopropyl alcohol is highly flammable.
Let it dry completely before heating
device.
CLEANING: HEATING CHAMBER
CLEANING: GLASS COMPONENTS
Cleaning is highly recommended after each use.
1. If there is residue in chamber, heat empty chamber to
clean it.
2. Let chamber cool down to room temperature and unscrew
it from Cira base.
3. Submerge chamber in 90%+ isopropyl alcohol for over 20
minutes, and then use a cotton swab to clean gently. Never
use water (isopropyl alcohol only).
Carefully remove glass mouthpiece and cap from Cira
base before cleaning.
1. Once removed, soak the glass components in isopropyl
alcohol.
2. Take away from isopropyl alcohol and rinse completely clean
with water.
3. Allow glass components to thoroughly dry before re-attaching
to Cira base.
Summary of Contents for CIRA
Page 1: ...CIRA USER MANUAL ...
