Single Plug-in Card Matrix Switcher
22
www.av-box.ru
USER/I/[x]:0408%;
Restore the signal card to its factory
default settings.
FMX-IBT
USER/I/[x]:0706%;
Set the audio source of input [x] to
HDMI embedded audio
Channel 04 in audio
command is:0706%
USER/I/[x]:0707%;
Set the audio source of input [x] to
analog audio
Channel 04 in audio
command is:0707%
USER/I/[x]:0408%;
Restore the signal card to its factory
default settings.
USER/I/[x]:0409%;
RS232 pass-through control mode
1: Control far-end device from the
RS232 port of this input card.
USER/I/[x]:0410%;
RS232 pass-through control mode
2(factory default): Control far-end
device from the RS232 port of this
Matrix Switcher.
FMX-OBT
USER/O/[x]:0804%;
Set the resolution of output [x] to
720P 60Hz
Resolution
Out08 1280x720P
USER/O/[x]:0813%;
Set the resolution of output [x] to
1080P 60Hz
Resolution
Out08 1920x1080P
USER/O/[x]:0824%;
Set the resolution of output [x] to
1024x768 60Hz
Resolution
Out08 1024x768
USER/O/[x]:0840%;
Set the resolution of output [x] to
3840x2160 30Hz
Resolution
Out08 3840x2160 30Hz
USER/O/[x]:0841%;
Set the resolution of output [x] to
3840x2160 60Hz
Resolution
Out08 3840x2160 60Hz
USER/O/[x]:0408%;
Restore the signal card to its factory
default settings.
USER/O/[x]:0409%;
RS232 pass-through control mode
1: Control far-end device from the
RS232 port of this output card.
USER/O/[x]:0410%;
RS232 pass-through control mode
2(factory default): Control far-end
device from the RS232 port of this
Matrix Switcher.
FMX-OAU
Setup commands
