All rights reserved. No part of this manual may be used in any form or by any means without written permission of the copyright owner.
7
из
12
8. Ramp usage intensity
The product is designed to operate in a mode in which the throughput capacity of one ramp should not exceed 160
tons of cargo transported through it daily. In case of exceeding the limit of intensity of use, the manufacturer declines
the responsibility to provide warranty and post-warranty service of the equipment.
9. Precautions for operating the ramp
The mobile ramp can be operated by persons who are familiar with this operation manual, have studied the device
and operating procedures, safety measures, maintenance, typical failures and troubleshooting procedures, storage,
transportation and operation rules.
Before starting work, it is necessary to inspect the overall condition of the ramp.
The permissible load is the summary of the weights of objects simultaneously on the ramp when it is supported by
another vehicle or stationary surface.
It is forbidden to use the ramp if there are any troubles.
Do not allow the maximum permissible ramp load to be increased.
Do not exceed the maximum ramp lowering speed and the maximum forklift speed.
It is forbidden to drive onto the ramp without support on the body/wagon/warehouse.
1. Never exceed the maximum load (see quality certificate for model).
2. Before starting each operation, make sure that there are no people in the working area.
3. Check tightness of connections, oil level, general condition of the ramp.
4. The ramp may only be used on plain surfaces. Do not use the ramp on uneven or unstable surfaces (rock, soil,
soft asphalt, etc.).
5. Make sure that the connection lip rests securely on the loading surface to a depth of at least 250 mm.
6. Do not drive up the ramp unless the lip rests on the body/wagon/warehouse by 250mm.
7. Immediately stop operating the ramp if the lip moves and eliminate the cause of the ramp movement.
8. Make sure that the ramp is connected to the truck with chains and carabiners (hooks).
9. Make sure that the wheel chocks are installed under the ramp wheels.
10. Wheels are only used to move the ramp. It is strictly forbidden to drive onto the ramp resting on wheels.
11. Do not move the ramp while lowering/lifting.
12. Do not drive into the ramp if the valve on the hydraulic pump is closed.
13. Do not stop or stall suddenly on the ramp.
14. Ensure free cylinder movement when using the ramp directly.
15. The supporting legs on the ramp are only used for safety when the truck accidentally disconnects from the ramp.
The use of the ramp standing on the legs is strictly prohibited.
