•
Finally, connect the 5V power adaptor supplied to the unit and switch on.
•
The switch inputs can now be selected manually using the select and OK switches on the front of the unit.
•
The green LED’s on the front of the unit will indicate which device is live at any one time.
•
Alternatively, there is now also a Picture-in-Picture (PiP) function which shows a preview of all connected
devices on the main screen.
•
To activate the PiP function, press the
“
OK
”
button on either the front of the unit or the remote control.
•
You will then see small preview screens of the other connected devices in order from top to bottom.
(
Note:
in 4K mode only small icons will be visible instead of preview screens).
•
Navigate up and down the preview screens using either the
“
Ch+
”
and
“
Ch-
“
buttons on the remote
control or the
“
Select
”
button on the unit, press
“
OK
”
on the remote control or front of the unit to confirm.
In The Box
1.
HDMI Switch 4x1
2.
IR Remote Control
3.
5V DC Power Adaptor
4.
User Manual
Warning
•
For reasons of electrical safety this device must never be immersed in water, exposed to damp conditions
or excessive force.
•
Please do not use this device if you find that it is damaged in any way and only use the power supply
provided by the manufacturer.
•
When not in use for long periods please disconnect the power supplies from the mains.
•
Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your
warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its
useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2020. AVSL Group Ltd.
Input 1 is
displayed on the
main screen
Inputs 2, 3 and 4
shown as
preview screens
Unit back
Unit front
