7
8
9
10
11
12
In case of center supports and horizontal struts
we recommend to attach the projection surface
first and then please follow the instructions
under point 16-23.
Do not open the packaging of the surface before
the assembly of the basic frame is finished to avoid
damages of the surface by the sharp edges of the
frame profiles.
Lay out the surface according to the labeling
on the backside of the surface into the frame.
Take care that the ground is absolutely clean!
The surface is attached to the frame at the
circumferential slot with its hooks.Middle
struts or other support elements are mounted
afterwards. See point 16 to 22.
MOUNTING
The Decoframe is mounted to the wall with its
preinstalled keyhole brackets, which can be
adjusted individually.
Summary of Contents for Stumpfl Decoframe
Page 1: ...DECOFRAME MANUAL ...
Page 6: ......
