7
Operation
INSTALLATION CHECK‐LIST BEFORE OPERATION:
1.
Have all packing materials and tape been removed from the interior and exterior of the refrigerator?
2.
Have the installation instructions been followed, including connecting the machine to electricity?
3.
Has proper grounding been installed for the refrigerator?
4.
Has the machine been leveled?
5.
Is there a clearance of at least 2” to 3” at the rear for proper air circulation?
USING YOUR CONTROL PANEL:
This refrigerator has a temperature range from 34° F to 50° F.
Power Button
Press and hold this button down for three seconds to power your unit on. Once pressed, the “Run”
indicator light will illuminate to indicate the unit is on and running. Press and hold this button for three
seconds again and the unit will power off and the “Run” Indicator light will turn off.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 50° F is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 34° F is the lowest
available temperature on this unit.
Interior Light
Press this button to alternate between the two internal light colors: blue and white. Please refer to the
“Internal Light” section on the next page for further details.
Note: Pressing and holding the increase and decrease temperature buttons at the same time will switch the
temperature display from °F to °C.
Tip: If you powered the unit off, please wait at least five (5) minutes before powering it back on.
