6
INSTALLING THE SHELVES:
1.
Open the door completely.
2.
Ensure that the plastic posts are installed on the left and right sides of the shelf track onto which you are
attempting to install the shelf.
3.
Lifting the rear of the shelf upwards above the shelf track, align the cutouts in the left and right sides of
the shelves over the plastic posts mounted to the inner cabinet.
4.
Gently set the shelf down on the shelf track.
REMOVING THE SHELVES:
1.
Open the door completely.
2.
Remove all of the contents loaded on the shelf, if applicable.
3.
With the shelf pushed all the way to the rear of the unit, position the cutouts in the left & right sides of
the shelves under the plastic posts on each side of the shelf track.
4.
Push down on the front of the shelf while lifting up on the rear of the shelf (picture a seesawing motion)
until the shelf passes over the plastic posts.
5.
Pull the shelf forward until it is completely removed from the inner compartment.
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their track.
