Avallon AFR242SSODLH, Owner'S Manual

11

Leveling the Outdoor refrigerator

The outdoor refrigerator should be installed on a firm and level surface 

that will be able to support the entire weight of a fully loaded unit. It 

is important for the outdoor refrigerator to be leveled in order to work 

properly. It can be raised or lowered by rotating the plastic sheaths 

around each of the feet on the bottom of the machine. If you find that 

the surface is not level, rotate the feet until the outdoor refrigerator 

becomes level. You may need to make several adjustments to level it. 

We recommend using a carpenter’s level to check the machine. Turn the 

leveling feet to the right to lower that side of the outdoor refrigerator. 

Turn the leveling feet to the left to raise that side of the outdoor 

refrigerator.

Important: 

Once you are ready to install the unit in a cabinet or directly on the floor, you must 

adjust the feet to level the outdoor refrigerator.

!

Installing the Door Handle

Caution: 

Do not over-tighten the screws as this may cause damage to the handle or to the stainless 

steel door.

!

To install the door handle:

1. 

Open the door and carefully pull the door gasket around the area where the handle is to be installed. 

2. 

Insert each Phillips head screw through the gasket side of the door until the screw passes through the door. 

3. 

Align the handle with the screws and tighten using a Phillips head screwdriver until the handle is flush 

against the door frame. 

4. 

Carefully press the door gasket into its original position.