12
Installing the Shelves
Removing the Shelves
To prevent damaging door gasket, make sure to open the door fully before pulling the shelves off their tracks.
1. Open the door completely.
2.
Ensure that the metal guide posts are attached to the back of the shelf.
3.
While lifting the right side of the shelf up 45°, rest the left metal guide post on the shelf track.
4.
Slowly push the shelf back until the right metal guide post reaches the vertical indentation in the cabinet.
5.
Gently set the shelf down on the track.
1. Open the door completely.
2.
Remove all of the contents loaded on the shelf, if applicable.
3.
Ensure that the shelf is pushed back completely.
4.
Carefully lift either the left or right side of the shelf up 45°.
5.
Pull the shelf forward until it is completely removed from the inner compartment.
Summary of Contents for AFR242SSODLH
Page 21: ...www avallon com 2020 Avallon ...