9
Clearance Requirements
When installing the outdoor refrigerator under a counter, follow the recommended spacing dimensions shown.
To ensure proper service access and ventilation, allow at least 1-2” of clearance at the back,
1
/
4
” at the top, and
1
/
4
” at the sides. If the door side is against a wall, allow at least 2
3
/
8
” of clearance. The installation should allow
the unit to be pulled forward for servicing, if necessary.
90
Door Swing
1 13/
16
“
24
3
/
4
"
2 1/16”
1-2”
1/4”
1/4”
Note:
The outdoor refrigerator should be installed on a firm and level surface that will be able to
support the entire weight of a fully loaded unit. It is important for the outdoor refrigerator to be
level in order to work properly. If needed, you can adjust the height of the outdoor refrigerator by
rotating the feet. See the “Leveling the Outdoor refrigerator” section.
Note:
A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.
Notes:
•
To ensure proper service access and ventilation, allow between 1 - 2 inches of clearance at
the back as shown in the diagram.
•
The installation should allow the unit to be pulled forward for servicing, if necessary.
•
A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.
Top View:
Side View:
Summary of Contents for AFR242SSODLH
Page 21: ...www avallon com 2020 Avallon ...
