background image

Product Warranty

 

 

Warranty Period  

Avallon will be responsible for:  

Consumer will be responsible for: 

 

 

1st  year 

All costs for repairing or replacing parts and/or unit which proves to 

be defective.  All transportation costs in the first 90 days.

 

 

All transportation costs after 90 days.

 

 

Limited 2nd-5th year

 

(compressor only)

 

Repairing or replacing any compressor which proves to be 
defective. (Labor not included)

 

Labor and all transportation costs

This product is warranted by Avallon and is subject to any conditions set forth as follows:

 

 

WHAT IS COVERED:

 

 

One Year Parts and Labor:  For one year from the date of original retail 
purchase, Avallon will repair or replace any part free of charge 
including labor that fails due to a defect in materials or workmanship. 
Avallon will be responsible for all transportation costs for the first 90 
days from original purchase date, after 90 days the consumer will be 
responsible. Labor will be performed free of charge at an authorized 
Avallon repair facility and will supply new, rebuilt, or refurbished parts 
free of charge. Avallon may request a defective part be returned in 
exchange for the replacement part.  After  the 12 month period, 
Avallon will no longer be responsible for labor charges incurred or 
replacement parts. All defective products and parts covered by this 
warranty will be repaired or replaced on a mail-in basis to an Avallon 
authorized repair facility.

 

 

Five Year Limited Warranty (Compressor– Labor Not Included): In the 
second through fifth year from the date of original retail purchase, 
Avallon will replace the compressor free of charge. The consumer will 
be responsible for all transportation and labor costs. Avallon will sup- 
ply a new, rebuilt, or refurbished compressor and may request for the 
defective compressor to be returned in exchange. This limited 5-Year 
warranty is for the compressor only and does not include labor.

 

 

All warranties apply to the original purchaser only, and only covers 
defects in workmanship experienced during operation of the product 
under normal service, maintenance, and usage conditions. This war- 
ranty applies to the purchase and use of this product in residential 
settings within the United States of America. All products and parts 
replaced by Avallon under warranty service become the property of 
Avallon. All defective products and parts covered by this warranty

 

will be repaired or replaced on a mail-in basis to an Avallon author- 
ized repair facility.

 

 

Exceptions: Commercial or Rental Use Warranty: 90 days labor and 
parts from date of original purchase. No other warranty applies.

 

 

WHAT IS NOT COVERED- The following limitations apply to the 
coverage of this warranty. This warranty does not  cover:

 

 

Labor charges for installation, setup or training to use the 
product.  Shipping damage, and any damage caused by 
improper packaging for shipment to an authorized service 
center, and any damaged caused by improper voltage or 
any other misuse, including abnormal service, handling, or 
usage. Cosmetic damage such as scratches and dents. Nor- 
mal wear and tear on parts or replacement of parts designed 
to be replaced, e.g. filters, cartridges, batteries. Service trips

 

to deliver, pick-up, or repair, install the product, or to instruct in 
proper usage of the product. Damages or operating prob- 
lems resulting from misuse, abuse, operation outside environ- 
mental specifications, uses contrary to instructions provided in 
the owner’s manual, accidents, acts of God, vermin, fire, 
flood, improper installation, unauthorized service, mainte- 
nance negligence, unauthorized installation or modification, 
or commercial use. Labor, service transportation, and ship- 
ping charges for the removal and replacement of defective 
parts, beyond the initial 12 month period. Products that have 
been modified to perform outside of specifications without

 

the prior written permission of Avallon. Products lost in ship- 
ment, or theft. Products sold AS IS or from an unauthorized 
reseller. Products that have had their serial numbers removed, 
defaced, or with serial numbers that have been invalidated. 
Damage from other than normal household use. Replace- 
ment or repair of household fuses, circuit breakers, wiring or 
plumbing. Damage to personal property from use of product. 
Damage from service other than from an authorized Avallon- 
repair facility. Hoses, knobs, lint trays and all attachments, 
accessories and disposable parts. Any service charges not 
specifically identified as normal such as normal service area

 

or hours. Any special or consequential damages arising out of

 

the use of the product.

 

 

OBTAINING WARRANTY SERVICE: If you believe your product is defective, contact Avallon Customer Support for troubleshooting assis- 
tance and warranty service a

www.avallon.com 

or call 1-866-471-7427. Before contacting Customer Support you are required to have 

your model number, serial number and proof of purchase available upon request. Once an Avallon authorized representative has con- 
firmed that your product is defective and eligible for warranty service, the product must be returned to an Avallon authorized repair 
facility. Avallon is not responsible for damage resulting from shipper mishandling or improper packaging. Do not return a defective prod- 
uct to the place of purchase. Products received without a return authorization number will be refused. 

 

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY 
PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNI- 
TIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, 
TORT, OR OTHERWISE. 

IN NO EVENT AND UNDER NO CIRCUMSTANCE OF ANY TYPE OR KIND SHALL THE SELLER, MANUFACTURER AND/OR DISTRIBUTOR BE 

LIABLE FOR ANY REASON, UNDER ANY THEORY, FOR MORE THAN THE BASIC COST OF THE PRODUCT TO THE PURCHASER OR END USER.

 

SOME STATES DO NOT 

ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU 
SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

 

 

Summary of Contents for AWBV15246



















Reviews: