4
TYPES OF INSTALLATION:
This beverage refrigerator has been designed for free‐standing or built‐in installation. In every case, there
must be adequate ventilation and access for service.
Free‐standing Installation
A free‐standing installation will allow you to install the beverage refrigerator in almost any place you
desire. You must follow the stated instructions for electrical requirements and leveling the beverage
refrigerator.
Built‐in Installation
A recessed installation will allow you to install the beverage refrigerator under a counter or in a kitchen
cabinet provided the clearance space requirements around the beverage refrigerator are followed. It is
necessary to allow adequate ventilation space around the unit (make sure there is at least some
ventilation room for the back of the unit). The following additional items must be observed:
1.
Place the beverage refrigerator in front of the installation location.
2.
Adjust the feet and place the unit flat on the floor or on a platform depending on your installation
requirements.
3.
If the electrical outlet for the beverage refrigerator is behind the cabinet, plug in the beverage
refrigerator.
4.
Push the beverage refrigerator into position.
5.
Installation Clearance Requirements:
When installing the beverage refrigerator under a counter, follow the recommended spacing dimensions shown.
•
To ensure proper service access and ventilation, allow between 2 ‐ 3 inches of clearance at the back as shown in
the diagram.
•
The installation should allow the unit to be pulled forward for servicing, if necessary.
•
A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with National Electrical Code
and local codes and ordinances, is required.
Warning: DO NOT install the beverage refrigerator behind a closed cabinet door.
Important: Once you are ready to install the unit in a cabinet or directly on the floor, you must adjust the
feet to level the beverage refrigerator.
