14
AVALLON.COM
®
©2021 Ferguson Enterprises, LLC V2.1-10152021
Operation
Installation Checklist before Operation
Using the Temperature Control Panel
The refrigerator has a temperature range of 40° F to 65° F.
The upper zone has a temperature range of 54° F to 65° F.
The lower zone has a temperature range of 40° F to 54° F.
UPPER
LOWER
RUN
F
C
Power Button:
Turns the unit on and off. Press and hold this button for approximately three
(3) seconds to adjust between power on and power off.
Light Button:
Press this button to alternate between the two (2) internal light colors: Blue
and white. Press and hold this button for three (3) seconds to turn the light on and off.
Please refer to the “Internal Light” section for further details.
Upper Zone Temperature:
Press this button on the control panel to increase the
temperature by 1 degree increments.
Lower Zone Temperature:
Press this button on the control panel to lower the temperature
by 1 degree increments.
Run Light:
When lit, the unit is in cooling mode.
The
Celsius (C) or Fahrenheit (F) indicator
will be lit depending on which unit of
temperature measurement is being used. To switch between C and F, press and hold both
the Upper and Lower buttons simultaneously for approximately three (3) seconds. A beep
will sound and the indicator light will illuminate next to the desired temperature setting.
1. Have all packing materials and tape been removed from the interior and exterior of the refrigerator?
2. Have the installation instructions been followed, including connecting the machine to electricity?
And has proper grounding been installed for the refrigerator?
3. Has the machine been leveled?
4. Is the refrigerator in a site where the ambient temperature is between 50° F and 90° F all year
round?
5. Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for proper air
circulation?
i
i
